機械在庫リスト

    NC Machine Tools

    詳細はこちら

    CNC Multi-tasking machine
    SOLD

    Manufacturer MORISEIKI Model MT2000S 【売約済】 Year 2001
    Specification Control：Fanuc-18iTA (XYZBC-Axis) Max. Diameter x Length ：Φ550ｘ1000 Travels: XYZB: 565x±80x1077x±120x360deg. C-Axis control:0.001Deg. Main Spindle：8”Hollow, 　4500rpm、Spindle bore: Φ73 Sub spindle：６”Hollow,　 6000rpm、　Spindle bore: Φ56 Swivel-Milling spindle speed：10,000rpm, B-Axis:0.001deg. Spindle Taper：KM63、　ATC40 ●Swivel-Milling spindle through coolant ●Tool presetter is inside Main spindle
    詳細はこちら

    CNC Multi-tasking machine

    Manufacturer OKUMA Model LB35Ⅱ-MATC-Y Year 1995
    Specification CNC Multi-tasking machine Okuma LB-35Ⅱ-MATC-Y (with C-axis ,Y-axis and ATC),　 Control: OSP-7000L , Chuck Size: 15inch, Swing over bed:700, Max.Turning diameter :450,　 Max.Turning length: 600 Travel: XZYC: 600x815x170(+100~-70)x360deg.(Indexing:0.001deg.) Spindle speed: 3,200rpm, Spindle drive motor: VAC30/22KW(30min/continuous Rating) Milling Spindle speed: 2,000rpm Turret: V8ATC, Tool Shank: BT50, ATC32
    詳細はこちら

    CNC Multi-tasking machine
    SOLD OUT

    Manufacturer MAZAK Model INTE35YR/1500U Year 2001
    Specification CNC Multi-tasking machine Mazak Integrex-35YR/1500U, Year2001 Control：MAZATROL Fusion 640T（X,Z,C,Y） 12”Hollow chuck、　Spindle through holl：Φ88 Max.Dia：Φ570、　Max. Length：1527 Main Spindle speed：3,000rpm、 Spindle 0.001°Indexing（C Axis） Milling Tool Spindle：6000rpm（Spindle Through coolant ）/BT40、　　 　 ATC40 (BT40-20unit/KM63-20unit) Spindle Motor：AC30KW
    詳細はこちら

    CNC Multi-tasking machine
    SOLD OUT

    Manufacturer MORISEIKI Model MT1500S Year 2003
    Specification Control：Fanuc-16iTB (XYZB-Axis) Max. Diameter x Length :Φ400ｘ900、 Travel: XYZBC: 455x ±70x970x ±120x360deg.　 Main spindle & Sub spindle:６”Hollow chuck Both of Spindle speeds:6000rpm、Both of Spindle bore:Φ56 Swivel-Milling spidle speed:20,000rpm Spindle Taper: Capto C5、 ATC40 ● Swivel-Milling spindle throughcoolant ● XYZB-Axis-Heidenhain Scale ● Tool presetter is inside Main spindle ● Main spindle power（15KW) ● Chipconveyor
    詳細はこちら

    CNC Multi-tasking machine
    SOLD OUT

    Manufacturer MAZAK Model INTEGREX200-ⅢS 【売却済】 Year 2004
    Specification Multi-tasking machine Mazak INTEGREX200-ⅢS， Year2004 Control：MAZATROL 640MT Pro　　 Max.Turing Dia.xLength：φ660×1016、 Trevels：XYZBC：580x160x1045x225°x 360° Main spindle：8” chuck、　 Second spindle: Special Collet Chuck (Machining for the conical shape of the eccentric part) Spindle speed：5000rpm、 Both of spindle indexing：0.0001°、 C-Axis cotroring Second spindle W-Axis travel：1050 Milling Spindle speed：12,000rpm、 KM63、ATC40, B-Axis: 5° Indexing(Coupling clamp) B-Axis: 0.0001°Indexing（Can not Contour cutting） ● Scale feedback（X.Y-Axis） ● Milling spindle through coolant ● Aouto. Tools Eye ● Chipconveyor
    詳細はこちら

    CNC Multi-tasking machine
    SOLD OUT

    Manufacturer MORISEIKI Model ZT1500Y Year 2007
    Specification CNC Turning Center Moriseiki ZT-1500Y, Yr.2007 Contral: Fanuc-18iTB (MSX-501Ⅲ) Chuck: 6”Collet Hollow, Max. Swing: 250mm Max. Diameter x Length: φ190 x 120mm Bar work capacity: φ52mm, Turret: V12( both spindle) Spindle speed: 6000rpm (both spindle) Main shaft through hole: φ61mm 4M Automatic Bar feeder: AlPS ASR X-45/51 PN2
    • 1-6  Total：6   1/1Pages
    • 1